Car, 4WD & Light Commercial - Manual Transmission and Differential Oils
Gear oil for manual gearboxes, transfer cases and differentials
Greyhound Lubricants gear oil covers manual gearboxes, transfer cases and differentials on cars, bakkies and SUVs. GL-4 (GL4) grades protect synchromesh gearboxes without attacking yellow metals, GL-5 (GL5) grades carry the extreme pressure protection hypoid differentials need, and a limited slip version suits LSD rear axles. Viscosities run from SAE 90 and 80W-90 mineral through 85W-140 for heavy axles to fully synthetic 75W-90 for modern gearboxes and cold starts. Check the owner manual for the GL rating before choosing, since a GL-5 gear oil in a GL-4 gearbox can shorten synchro life.
How to choose the right gear oil
The GL rating matters more than the brand. Most manual gearboxes on cars and bakkies specify GL-4 (GL4); a GL-5 (GL5) gear oil carries more extreme pressure additive and is meant for hypoid differentials, where the sliding contact between pinion and crown wheel needs it. Using GL-5 in a gearbox built for GL-4 can wear brass synchro rings, while GL-4 in a differential leaves the hypoid gears underprotected. Viscosity follows the manual: SAE 90 or 80W-90 for most, 85W-140 for heavy or hot running axles, and 75W-90 synthetic where the manufacturer calls for it or where cold morning shifting is stiff. Limited slip differentials need a gear oil with friction modifier, so check the axle plate before buying. Each Greyhound gear oil page lists the GL rating, viscosity and pack sizes.
Monograde Mineral Gear Oils
Mineral Gear Oils
G-Moto 80W-90 GL4
G-Moto 80W-90 GL5
G-Moto 80W-90 GL5 (Limited Slip)
Multigrade Semi-Synthetic Gear Oils
None
Fully Synthetic Gear Oils

