Circulating Oil
Greyhound™ Circulating Oil is a rust and oxidation inhibited mineral oil range, ISO VG 32 to 460, developed for the conveyor and crusher bearings of copper crushing mills and for the circulating systems of plants and mines. It resists foaming, separates water quickly and protects against rust and corrosion in wet and dusty conditions. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that also lubricate loaded gearing (CLP). Light grades (32 to 68) suit turbine-type and R&O systems and combined hydraulic duty; medium grades (100 to 220) suit heavier bearings, general plant systems and paper machines; heavy grades (320 to 460) suit rolling mill bearings and heavy gearbox circulation.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 32 is a rust and oxidation inhibited mineral oil in the ISO VG 32 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the light band of the range it suits turbine-type and R&O circulating systems, high-speed spindle and bearing circulation, machine tool circulating systems, and combined hydraulic and circulating systems.
Specifications: ISO VG 32 (ISO 3448); viscosity 32 cSt at 40 °C and 5.2 cSt at 100 °C (ASTM D445); viscosity index 98 (ASTM D2270); flash point 220 °C min (ASTM D92); pour point -30 °C (ASTM D97); density 880 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 46 is a rust and oxidation inhibited mineral oil in the ISO VG 46 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the light band of the range it suits turbine-type and R&O circulating systems, high-speed spindle and bearing circulation, machine tool circulating systems, and combined hydraulic and circulating systems.
Specifications: ISO VG 46 (ISO 3448); viscosity 46 cSt at 40 °C and 6.6 cSt at 100 °C (ASTM D445); viscosity index 98 (ASTM D2270); flash point 220 °C min (ASTM D92); pour point -30 °C (ASTM D97); density 880 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 68 is a rust and oxidation inhibited mineral oil in the ISO VG 68 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the light band of the range it suits turbine-type and R&O circulating systems, high-speed spindle and bearing circulation, machine tool circulating systems, and combined hydraulic and circulating systems.
Specifications: ISO VG 68 (ISO 3448); viscosity 68 cSt at 40 °C and 9.2 cSt at 100 °C (ASTM D445); viscosity index 96 (ASTM D2270); flash point 230 °C min (ASTM D92); pour point -30 °C (ASTM D97); density 880 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 100 is a rust and oxidation inhibited mineral oil in the ISO VG 100 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the medium band of the range it suits plain and rolling bearings on heavier equipment, general plant circulating systems, paper machine oils and lighter enclosed gear and circulating combinations.
Specifications: ISO VG 100 (ISO 3448); viscosity 100 cSt at 40 °C and 12.4 cSt at 100 °C (ASTM D445); viscosity index 95 (ASTM D2270); flash point 230 °C min (ASTM D92); pour point -35 °C (ASTM D97); density 890 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 150 is a rust and oxidation inhibited mineral oil in the ISO VG 150 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the medium band of the range it suits plain and rolling bearings on heavier equipment, general plant circulating systems, paper machine oils and lighter enclosed gear and circulating combinations.
Specifications: ISO VG 150 (ISO 3448); viscosity 150 cSt at 40 °C and 14.5 cSt at 100 °C (ASTM D445); viscosity index 95 (ASTM D2270); flash point 230 °C min (ASTM D92); pour point -35 °C (ASTM D97); density 890 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 220 is a rust and oxidation inhibited mineral oil in the ISO VG 220 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the medium band of the range it suits plain and rolling bearings on heavier equipment, general plant circulating systems, paper machine oils and lighter enclosed gear and circulating combinations.
Specifications: ISO VG 220 (ISO 3448); viscosity 220 cSt at 40 °C and 18.9 cSt at 100 °C (ASTM D445); viscosity index 95 (ASTM D2270); flash point 238 °C min (ASTM D92); pour point -35 °C (ASTM D97); density 890 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 320 is a rust and oxidation inhibited mineral oil in the ISO VG 320 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the heavy band of the range it suits rolling mill backup and work-roll bearings (Morgoil-type systems commonly run VG 320 or 460), heavy gearbox circulating systems, and cement and mining plant circulation.
Specifications: ISO VG 320 (ISO 3448); viscosity 320 cSt at 40 °C and 24.1 cSt at 100 °C (ASTM D445); viscosity index 95 (ASTM D2270); flash point 238 °C min (ASTM D92); pour point -35 °C (ASTM D97); density 900 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.
Application: Lubrication of bearings and circulating systems in mills, plants and mines, including systems that also feed loaded gears.
Greyhound™ Circulating Oil 460 is a rust and oxidation inhibited mineral oil in the ISO VG 460 grade, developed for the conveyor and crusher bearings of copper crushing mills. It resists foaming, separates water quickly and protects against rust and corrosion in wet, dusty and dirty circulating systems. Every grade carries an ashless sulphur-phosphorus system with extreme pressure capability, so one product covers plain circulating duty (CL) and circulating systems that lubricate loaded gearing (CLP). In the heavy band of the range it suits rolling mill backup and work-roll bearings (Morgoil-type systems commonly run VG 320 or 460), heavy gearbox circulating systems, and cement and mining plant circulation.
Specifications: ISO VG 460 (ISO 3448); viscosity 460 cSt at 40 °C and 29.8 cSt at 100 °C (ASTM D445); viscosity index 95 (ASTM D2270); flash point 238 °C min (ASTM D92); pour point -35 °C (ASTM D97); density 900 kg/m³ at 15 °C (ASTM D4052); ASTM D130 copper corrosion pass.
Meets: DIN 51524 Part 1 (HL) and Part 2 (HM); ISO 11158 HL and HM; DIN 51517 Parts 1, 2 and 3 (C, CL, CLP); ISO 12925-1 CKC and CKD; AGMA 9005-F16 AS; Morgan No-Twist Rod Mill Lubricant; Danieli 0.000.001 Type 21; Schuler Pressen DT 55055; David Brown S1.53.101; SEB 181 226; U.S. Steel 224; Fives Cincinnati EP gear oils (suitable for use).
Benefits:
- Rust and corrosion protection: inhibitors protect internal surfaces even with water present.
- Demulsibility: water separates instead of forming an emulsion, so it can be drained from the reservoir.
- Anti-foam: rapid air release protects pumps and controls.
- Oxidation resistance: long oil life with little sludge or deposit formation.
- Extreme pressure and anti-wear protection: carries loaded gears and extends the life of moving parts.
- Low pour point and high filterability: easy cold start-up; suitable for very fine filters and oil-mist systems, since it contains no lead compounds.