Industrial & Manufacturing - Compressor Oils
Compressor oil for rotary screw and piston compressors
Greyhound Lubricants air compressor oil is formulated for the rotary screw and reciprocating piston air compressors found in workshops, plants, mines and on construction sites. Mineral grades in ISO 32, 46, 68 and 100 cover the standard service intervals recommended by Atlas Copco, Ingersoll Rand, Kaeser, Sullair and the piston compressors sold through hardware stores, while the fully synthetic grade extends drain intervals and resists the varnish and carbon build up that high discharge temperatures cause. Each compressor oil page lists the viscosity, the compressor types it suits and the pack sizes.
Choosing an air compressor oil
Use the viscosity the compressor manufacturer specifies, usually ISO 46 or 68 for screw compressors and ISO 100 for piston compressors running hot, and check whether the machine calls for a mineral or synthetic oil before switching. Screw compressors are sensitive to oil carry over and varnish, so stick to the drain interval and change the separator with the oil. Piston compressors in dusty conditions benefit from more frequent changes than the manual suggests. Never use engine oil in a compressor: the detergent package in engine oil foams and carries water into the air lines. Greyhound supplies compressor oil in 5 and 20 litre packs for single machines and 210 litre drums for plants running several compressors.
Mineral Compressor Oils
Compressor Oil 32
Compressor Oil 46
Compressor Oil 68
Compressor Oil 100

