Greyhound Heat Transfer 32: mineral heat transfer oil for closed, forced-circulation systems
Greyhound Lubricants Heat Transfer 32 is a high-quality mineral heat transfer oil for indirect heating in closed systems with forced circulation. Its aromatic base gives good heat transfer and thermal stability, with low acidity and no water or mechanical impurities, for clean, reliable operation and long service life. Rated to a maximum bulk temperature of 280°C.
Manufactured in Europe at ISO-certified facilities.
Applications
- Thermal oil heaters and boilers
- Indirect heating of reactors, tanks and vessels
- Heated presses, rollers and moulds
- Dryers and process heating in chemical, plastics, rubber, timber and food processing plants (non-food-contact)
Operating conditions
- Maximum bulk temperature 280°C; for duties above this, talk to us first
- Closed systems only, with forced circulation
- Hot oil must not contact air: use a sealed or nitrogen-blanketed expansion tank
- Not suitable for open systems or low-temperature cooling circuits
Typical properties
- Clear, light-coloured mineral oil
- Kinematic viscosity at 100°C: about 5.7 cSt
- Pour point: -30°C
- Flash point (closed cup): 243°C; self-ignition temperature: 287°C
- Acid number: 0.03 mg KOH/g; no water, no mechanical impurities
Typical values from production testing; they can vary slightly from batch to batch. The pour point is a laboratory flow limit, not an operating temperature.
Handling and service
- Do not mix with synthetic heat transfer fluids.
- Flush the system when changing from another fluid type.
- Check oil condition periodically (acid number, viscosity, flash point) and replace when degraded.
Pack sizes
Available in 5L (this listing), 20L, 210L drum. See the Heat Transfer Oil range page for the full picture.
Need a safety data sheet or a drum quote? Contact us.









