Car, 4WD & Light Commercial - Brake Fluids
Brake fluid for cars, bakkies and SUVs
Greyhound Lubricants DOT 4 brake fluid is a glycol based fluid for the hydraulic brake and clutch systems on cars, bakkies, SUVs and braked trailers. DOT 4 covers almost every vehicle on the road today, including those fitted with ABS and stability control, and is backwards compatible with DOT 3 systems. The high dry and wet boiling points keep the pedal firm on long descents and under repeated hard braking, and the formulation protects the seals and metal parts of the system against corrosion.
When and how to change brake fluid
Brake fluid absorbs moisture from the air through the hoses and reservoir cap, and after two to three years the water content lowers the boiling point enough for the pedal to go soft under hard use. Most manufacturers specify a change every two years regardless of mileage, and a tester at any workshop shows the water content in seconds. Use only a sealed container, because an opened bottle of brake fluid absorbs moisture on the shelf, and never mix a glycol DOT 4 with silicone DOT 5. Bleed from the wheel furthest from the master cylinder and keep the reservoir topped up throughout. Brake fluid strips paint, so rinse any spill with water immediately. Greyhound brake fluid comes in 250 ml and 500 ml for top ups, 1 litre for a full change and 5 litre for workshops.

