★★★★★ 4.96 on Google (162 reviews)Nationwide courier, R180 flatCollect free in Isando200+ oils and greases, 500 ml to bulkFleet or bulk pricing? WhatsApp 063 695 8085

Industrial & Manufacturing - Metal Working Fluids

Cutting fluid for lathes, mills, drills and grinders

Greyhound Lubricants machining fluid covers the three types an engineering workshop uses. The water soluble cutting fluid mixes with water into an emulsion for general turning, milling and drilling of steel and aluminium, where cooling matters most. Neat cutting oil is used undiluted for heavy cuts, threading, tapping and broaching, where lubrication at the tool edge matters more than cooling. The grinding fluid is a low foaming soluble built for surface and cylindrical grinders. Each cutting fluid page gives dilution ratios, the metals it suits and the pack sizes from 5 to 210 litres.

Getting the most from a machining fluid

Dilution is the main thing people get wrong: too weak and tools wear and parts rust, too strong and the sump foams and skin irritation starts. Mix the concentrate into water, not water into concentrate, and check the ratio with a refractometer rather than by eye. Keep the sump clean, skim tramp oil off the surface and top up with correctly mixed fluid, because the water evaporates and the emulsion drifts stronger over a shift. A soluble cutting fluid that smells on Monday morning has gone bacterial and needs a dump and clean, not a top up. Neat cutting oil does not have these problems but needs good extraction because it mists. Greyhound cutting fluid is sold in 5 litre packs for small shops and 20 and 210 litre packs for production machining.

Greyhound Lubricants

Soluble Cutting Fluids

Synthetic G-Cut 32

Neat Cutting Oils

G-Met Neat Cutting Fluid 32

Soluble Grinding Fluids

Synthetic G-Cut Grinding Fluid

Let's help you learn more about our product range!

Shopping Cart
Secure paymentWe accept Visa, Mastercard, American Express, Apple Pay, Google Pay, Capitec Pay, EFT, Payflex and ZeroPay